Z Automotive Tazer RAM Programmer Module

Description

• Permanently changing vehicle settings – changes made to the vehicle are permanent and will remain in effect even after disconnecting the programmer
• Live Vehicle Settings Change – changes are made live in real time and only work if the programmer is connected to the vehicle

The module is permanently programmed:

• Light show mode, 6 presets and 3 custom settings. Light shows flash all exterior lights, perfect for car shows/first responders/off-road visibility. Controlled by remote control or steering wheel buttons.
• DTC Display shows diagnostic codes that cause the check engine light to come on.
• Clearing engine errors
• Turning TPMS On/Off (Tire Pressure Check)
• Speedometer calibration for aftermarket tire sizes
• Possibility of installing factory fog lights
• Possibility of installing a factory reversing camera and an aftermarket front camera
• Turn on/off weather and traffic alerts from SiriusXM TravelLink
• Turning daytime running lights on/off and selecting which lights to use (depending on application)
• Turn on/off the daytime running lights function
• Changing daytime running lights
• Turn factory fog lights on/off
• Turn off your daytime running lights when using your turn signals
• Enable/Disable Fog Light Dropout (Fog lights do not turn off other lights)
• Enable/Disable AUX Button Settings
• Turn on/off power to electric mirrors
• Enable/Disable EasyExit (2015+ models)
• One-touch factory reset. The "unmarry" feature restores all vehicle settings to their factory state.

The module programs in real time (live):

• Dark Mode, turns off all interior and exterior lights when stationary with the engine running
• Enable/Disable Navigation Lock in Motion – Entering an address in the navigation while driving
• Change engine power mode (experimental feature, 2015+ models)
• Change Gearbox Mode (Experimental feature, 2015+ models)
• Activate the light show
• AutoFold – allows the side mirrors to be automatically folded and unfolded when the vehicle is turned on or off
• Camera/Image Input Selection
• Settings for activating AutoPark kill, traction control, and removing the TPMS (Tire Pressure Monitoring System) off warning
• Possible reduction gear simulation in 2WD and 4HI modes
• Clearing engine errors
• Stopwatch display on clock 0-30 or 0-60
• Line Lock – a front brake lock that allows for easy tire burning
• Possibility to open the front windows using the remote control (experimental function)
• Cooling mode, turns on the engine cooling fan on demand when the ignition is off and the engine is not running
• Winch Mode – Raises idle speed to a user-selectable value between 1250 and 2000 RPM Software updates, new software is available periodically, always free of charge!

Comments:

• It can be used Just with one car (blocked)
• For cars manufactured after 2018, the use of an additional harness ZABSR18 is required (sold separately)
• It is not compatible with RAM 1500DT and TRX, for these cars you need to purchase ZATDTR19, available in our store