Z Automotive Tazer JL Mini programmer module

Description

• Permanently changing vehicle settings – changes made to the vehicle will be permanent and will remain in effect even after disconnecting the programmer
• Live vehicle settings changes – changes are made live in real time and only work if the programmer is connected to the vehicle

The module is permanently programmed:

• Light show mode, 6 presets and 3 custom settings. Light shows flash all exterior lights, perfect for car shows/first responders/off-road visibility. Controlled by remote control or steering wheel buttons.
• Changing tire size
• Change axle ratios (maximum 4.50 for 4XE)
• Changing the low gear ratios of the transfer case
• Turning TPMS (Tire Pressure Monitoring System) On/Off
• TPMS alert pressure level change front/rear (25psi-85psi/1.7bar-5.8bar)
• Turn on/off the rear view camera
• Enable/Disable Cargo Camera Input (only for 8.4 Uconnect radio versions)
• Enable/Disable CD Input (Wired Audio)
• Turn on/off weather and traffic alerts from SiriusXM TravelLink
• Changing daytime running lights
• Turn on/off the daytime running lights function
• Turn factory fog lights on/off
• Fog lights do not turn off other types of lighting
• Turn one-touch lane change on/off
• Change headlight type (std/LED)
• Change of fog light type (std/LED)
• Changing the type of rear lights
• Front turn signal type change (std/LED) - also supports aftermarket LED lights
• Enable/Disable Trailer Tow Settings
• Disable electronic anti-roll bar (if uninstalled)
• Turn off the electronic steering pump (if hydraulic system is used)
• Disable front and rear axle lock
• Disable front axle disconnect module
• Axle lock control (for Rubicon version), lock can be activated on demand
• Enable/Disable AUX Button Settings
• Turn on/off blind spot detection (option available after installing or removing blind spot sensors)
• Turn on/off the seat belt warning sound.
• Enable/Disable/Configure ParkSense settings
• Changing the welcome screen
• Change HVAC control setting to enable dual-zone control in Jeep with single-zone climate control (only available after upgrading to 5″ radio)
• Enabling HomeLink to control other devices from the overhead panel
• Enable/Disable the auto-dimming mirror option after installation
• Enable/Disable/Change parking sensor configuration
• Enabling the keyless entry function after changing door handles or wiring
• Enable/Disable Halo mode for factory lamps (including BCM output)
• Automatic headlight activation (if installed)
• Enable/Disable the PANIC button on the remote control
• One-touch factory reset. The "unmarry" feature restores all vehicle settings to their factory state.

The module programs in real time (live):

• Turn on/off light show
• Enable/Disable the option to automatically apply the brakes when stopping at a red light.
• Function of activating the garage/gate remote control after turning off the engine
• Enable/Disable Navigation Lock in Motion – Entering an address in the navigation while driving
• TurnCAM, automatic rear view camera when turn signals are used (only for uconnect 8.4 radio)
• Kill3Honk, disables 3 horn beeps when leaving the vehicle running
• Mask alarm setting, monitors the mask, alarms when it is violated
• Turn passenger side heating on/off with remote start
• Enable/Disable the third brake light flashing function when braking (allows for increased off-road visibility)
• Brake light signal, set the frequency and number of flashes to pulsate when braking to increase visibility
• Winch mode, select idle speed between 1250-2000 rpm with the push of a button
• Possibility to set a light signal informing us about the correct pressure when inflating the wheels
• Dark Mode, turns off all interior and exterior lights when stationary with the engine running
• Activate and switch between cameras at any speed
• Vacuum/Boost Gauge allows real-time monitoring of manifold pressure levels, useful for turbo/boost applications
• Stopwatch display on clock 0-30 or 0-60
• Force RWD (rear wheel drive)
• Turning off the Start/Stop system remembers the last state of the autostart system and sets it for you the next time you start the vehicle
• AutoTracKill, remembers the last state of the traction control system and will set it for you the next time you start the vehicle
• Deactivation of the anti-roll bar on 2WD cars at speeds up to 48 km/h or any speed if the function is fully unlocked
• Cooling mode, turns on the engine cooling fan on demand when the ignition is off and the engine is not running
• License Plate Dimming (Gladiator) – Tazer JL Mini automatically turns off the license plate light when reversing or using the TurnCam to reduce glare.
• Button mapping allows you to use the cruise control up, down, or right buttons as quick access to certain Tazer JL features when cruise control is off
• Rock Crawl, can lock all four brakes by pressing the buttons on the steering wheel to keep the vehicle stationary, especially useful off-road
• Line Lock – a front brake lock that allows for easy tire burning
• DTC Display shows diagnostic codes that cause the check engine light to come on.
• Clearing engine errors
• TC Kill – turns off traction control, stability control and ABS
• Activates the rearview camera and any accessory underbody, front, cargo area or media player camera at any speed
• Turn Assist locks the rear, inner wheel during a turning maneuver to increase the angle of approach
• Software updates, new software is available periodically, always free of charge!

Comments:

• Can only be used with one car (lock)