Z Automotive Tazer DT module, programmer

Description

• Permanently changing vehicle settings – changes made to the vehicle are permanent and will remain in effect even after disconnecting the programmer
• Live Vehicle Settings Change – changes are made live in real time and only work if the programmer is connected to the vehicle

The module permanently programs:

• Light show mode, 6 presets and 3 custom settings. Light shows flash all exterior lights, perfect for car shows/first responders/off-road visibility. Controlled by remote control or steering wheel buttons.
• DTC Display shows diagnostic codes that cause the check engine light to come on.
• Changing tire size
• Changing the axle ratios
• Changing the reduction gear ratios
• Turning TPMS On/Off (Tire Pressure Check)
• TPMS alert pressure level change front/rear (25psi-85psi/1.7bar-5.8bar)
• Turn on/off the rear view camera
• Enable/Disable Cargo Camera Input (only for 8.4 Uconnect radio versions)
• Enable/Disable CD Input (Wired Audio)
• Turn TravelLink/XM On/Off
• Changing daytime running lights
• Turn on/off the daytime running lights function
• Turn factory fog lights on/off
• Fog lights do not turn off other types of lighting
• Enable/Disable Halo mode for factory lamps (including BCM output)
• Turn one-touch lane change on/off
• Change headlight type (std/LED)
• Change of fog light type (std/LED)
• Changing the way the rear lights illuminate
• Front turn signal type change (std/LED) - also supports aftermarket LED lights
• Enable/Disable Trailer Tow Settings
• Enables/Disables the ability to adapt locks after replacing the axles from the Powerwagon model
• Enable/Disable AUX Button Settings
• Turn on/off blind spot detection (option available after installing or removing blind spot sensors)
• Enable/Disable/Change parking sensor configuration
• Changing the splash screen for different RAM models
• Enable/Disable the PANIC button on the remote control
• Activation of electric mirrors
• Activation of the electric stage
• Possibility of turning off the steering pump when installing the hydraulic system
• One-touch factory reset. The "unmarry" feature restores all vehicle settings to their factory state.

The module programs in real time (live):

• Electric folding mirrors – the mirrors fold and turn off when the engine is turned on or off
• Remote control of front windows
• Enable/Disable Navigation Lock in Motion – Entering an address in the navigation while driving
• Possibility of activating automatic brake application when stopping at a red light
• Turn on the light show
• Activates the rearview camera and any accessory underbody, front, cargo area or media player camera at any speed
• AutoTracKill, remembers the last state of the traction control system and will set it for you the next time you start the vehicle
• Turning off the Start/Stop system remembers the last state of the autostart system and sets it for you the next time you start the vehicle
• TurnCAM, automatic reversing camera when turn signals are used
• Kill3Honk, disables 3 horn beeps when leaving the vehicle running
• ParkCam, activates SurroundView and the camera when the front parking sensors detect an obstacle
• Dark Mode, turns off all interior and exterior lights when stationary with the engine running
• TC Kill, disables traction control, stability control and ABS systems
• Turn Assist, locks the rear, inside wheel to take a sharper turn
• Force RWD forces the car to use rear-wheel drive only
• Possibility to set a light signal informing us about the correct pressure when inflating the wheels
• Stopwatch display on clock 0-30 or 0-60
• Cooling mode, turns on the engine cooling fan on demand when the ignition is off and the engine is not running
• Winch mode allows you to define the idle speed between 1300-2000 rpm
• Line Lock – a front brake lock that allows for easy tire burning
• Rock Crawl, can lock all four brakes when you press the assigned steering wheel shortcut to keep the vehicle stationary – especially useful off-road
• Button mapping allows you to use the cruise control up, down or right buttons as quick access to certain Tazer DT features when cruise control is off
• Clearing engine errors
• Remembers your AutoStartStop settings
• Manual engagement of 2WD or 4Hi lock

Comments:

• It can be used Just with one car (blocked)
• Fits 1500 DT (2018-2024) and TRX (2018-2024) models only
• Does not fit Classic models
• 2020 and newer vehicles have a tire size limit of 35 inches, after which ParkSense will be disabled. This is a Dodge factory limit and there is currently no way to override it.